Top 10 Blank L Independent Trading Hoodies & Sweatshirts Reviews

8.5 oz./yd² (US) 14.1 oz./L yd (CA), 80/20 cotton/polyester blend fleece with 100% cotton face, 20 singles (Solid, Camo colours & Gunmetal Heather) Heather colours, Safety Colours, Neon Pink are 55/45 cotton/polyester Grey Heather is 75/25 cotton/polyester Standard fit Jersey lined hood Split-stitched double-needle sewing on all seams Twill neck tape 1x1 ribbing at cuffs & waistband Metal eyelets Pouch pocket Tear away label Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing. When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying. Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees. 300 degrees or lower is a safer temperature to avoid ink migration problems.

10 oz.(US) 16.7 oz.(CA), 80/20 cotton/polyester blend 3-end fleece with 100% cotton face, 32 singles Camo Colors & Grey Heather: 75/25 cotton/polyester Charcoal Heather: 55/45 cotton/polyesterSafety Colors: 52/48 cotton/polyester (Safety Yellow, Safety Orange)Generous fitFleece lined hoodSplit stitch double needle sewing on all seamsTwill neck tape1x1 ribbing at cuffs and waistbandNickel eyeletsTearaway label**Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.If you are using the pants or shorts to color match as a set, please order samples to see how well they match. Colors may vary

9 oz./yd², 80/20 ring spun cotton/polyester blend with 100% cotton face, 30 singles Jersey lined hood Split stitch double needle sewing on all seams Twill neck tape 1 x 1 ribbing at cuffs and waistband Sewn eyelets Woven label Please note: The tie-dyeing process gives each garment unique character. Please allow for slight color variation in production and washing.   Care Instructions: Due to the nature of tie-dye, loose pigments may remain on the surface of the garments. Therefore it's strongly recommend washing these garments only with like-colored garments, as some of the tie dyes may stain light or white colored garments in the wash cycle. Washing the garments in cold water will reduce the possibility of staining.

52/48 ringspun cotton/polyester blend 3-end fleece Standard fit Raglan sleeves Blind stitch + coverstitch sewing Twill neck tape Woven label  Please note: The Wave Wash process gives each garment unique worn in look and feel, no 2 garments are exactly the same. When making Wave Wash garments we cut and sew garments then give them a heavy garment wash that gives that ultra soft, worn in, Wave Wash feel. Each garment will have different levels of wash effects, please allow for slight color variation in production.   Wave Wash fabric has a Cotton/Polyester Blend face yarn. Please do your own testing prior to screen printing. This is not a discharge friendly fabric.   When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying.   Wave Wash Camo Colorways are a Water Based Print on a Cotton/Polyester Blend fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees.

9 oz. (US) 15 oz (CA), 80/20 cotton/polyester blend with 100% cotton face, 30 singles Standard fit Jersey lined hood with sewn eyelets Split stitch double needle sewing on all seams Twill neck tape 1 x 1 ribbing at cuffs and waistband Dyed-to-match drawcords Pouch pocket Woven label Please note: Due to the nature of pigment dye, loose pigments may remain on the surface of the garments. We therefore strongly recommend washing these garments only with like-colored garments, as some of the pigment dyes may stain light or white colored garments in the wash cycle.Washing the garments in cold water will reduce the possibility of staining. Care Instructions: The pigment-dyeing process gives each garment unique character. Please allow for slight colour variation in production and washing. *PFD Note: Our PRM4500 & PR33500 Prepare For Dye sweatshirts are not 100% Cotton. They are a 3-End Knit with 100% cotton Face Yarn, 100% Polyester Middle Yarn, and 80% Cotton/20% Poly back yarn. We chose this blend to achieve some stretch, and an ultra-soft feel for our pigment dye that isn’t found in 100% Cotton. Please do your own testing prior to bulk production. Pigment Dyes, Tie Dyes and other unique dyes/washes work best on this garment. The sewing thread on this PFD Garment is a polyester core cotton sheath thread. We use this to achieve the strength of polyester thread with the dye capabilities of Cotton thread.

6.5 oz. (US) 11 oz. (CA), pre-laundered, 80/20 cotton/polyester with 100% cotton anti-pill face, 40 singles Charcoal Heather: 55/45 cotton/polyester Gunmetal Heather: 65/35 cotton/polyester Unisex, Slim fit double needle splitstitched throughout Unlined hood with nickel eyelets Plastic tipped white round drawcord Twill neck tape 1x1 ribbing at cuffs, waistband, and pocket openings Pouch pocket Tearaway label Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing. When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying. Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees.

6.5 oz. (US) 11 oz. (CA), pre-laundered 80/20 cotton/polyester blend fleece with 100% cotton face, 40 singles Charcoal Heather: 55/45 cotton/polyester Gunmetal Heather: 65/35 cotton/polyester Unisex, slim fit Double-needle splitstitched throughout Unlined hood with nickel eyelets Plastic tipped white round drawcord Twill neck tape White coil kissing zipper with nickel pull 1x1 ribbing at cuffs, waistband & pocket openings Split-pouch pocket Tearaway label Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing. When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying. Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees.

13.5 oz.(US) 22.5 oz. (CA), 70/30 ring spun cotton/polyester fleece,100% cotton face yarns on solid colors, 20 singles Double fleece lined hood Antique silver eyelets Heavy duty 100% cotton shoestring drawcord with antique silver tips Double ribbing side panels for stretch Reverse coverstitch sewing on all seams for durability and a premium finish Body and hood panels sewn Cross-Grain to limit shrinkage & shortening after wash 520gm 100% cotton 1x1 ribbing at cuff and waistband Tearaway woven label Please note: The heather colors are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.

8.5 oz.(US) 14.1 oz.(CA), cotton/polyester blend fleeceSolid Colors & Gunmetal Heather: 80/20 cotton/polyester with 100% cotton 20 singles face yarn Grey Heather: 75/25 cotton/polyesterAll other Heather Colors: 55/45 cotton/polyester (Charcoal Heather, Classic Navy Heather, Royal Heather, Army Heather)Split stitch double needle sewing on all seamsTwill neck tape1x1 ribbing at collar, cuffs and waistbandStandard fitTear away neck label**Please note: The SS3000 heather colorways are not all made of 100% cotton face yarn. Please do your own testing prior to screen printing.

6.5 oz., pre-laundered 80/20 ring spun cotton/polyester blend fleece with 100% cotton face, 40 singles Camo colors has waterbased camoflauge print Split stitch double needle sewing on all seams 3/8” flat drawcord Twill neck tape 1x1 ribbing at cuffs Sewn eyelets Tearaway label Please Note: When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying. Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. It is recommended to use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees.