Top 10 Blank Adult Pullover Hoodies Reviews

813.5 oz.(CA), 50/50 preshrunk cotton/polyesterHeather Sport colors: 40/60 cotton/polyesterAir jet yarn = softer feel and reduced pillingDouble-lined hood with color-matched drawcordDouble needle stitching at shoulder, armhole, neck, waistband and cuffsPouch pocket1 x 1 rib with spandexQuarter-turned to eliminate center creaseSafety Green: Compliant with ANSI / ISEA 107Tearaway label

8 oz. (US) 13.3 oz (CA), pre-shrunk 50/50 cotton/polyester Oxford is 49/51 cotton/polyester NuBlend pill-resistant fleece High stitch density for a smooth printing canvas 2-ply hood with grommets and matching drawstring Double-needle stitched neck, armholes, and waistband Set-in sleeves Front pouch pocket Concealed seam on cuffs 1x1 ribbed cuffs and waistband with spandex Seamless body Quarter-turned

8.5 oz./yd² (US) 14.1 oz./L yd (CA), 80/20 cotton/polyester blend fleece with 100% cotton face, 20 singles (Solid, Camo colours & Gunmetal Heather) Heather colours, Safety Colours, Neon Pink are 55/45 cotton/polyester Grey Heather is 75/25 cotton/polyester Standard fit Jersey lined hood Split-stitched double-needle sewing on all seams Twill neck tape 1x1 ribbing at cuffs & waistband Metal eyelets Pouch pocket Tear away label Please note: The heather colorways are not made of 100% cotton face yarn. Please do your own testing prior to screen printing. When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying. Our Camo Colorways are a Water Based Print on 100% cotton fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees. 300 degrees or lower is a safer temperature to avoid ink migration problems.

12.5 oz., 50/50 combed ringspun cotton/polyesterMatching flat drawcordPouch pocketRibbed cuffs and waistband with spandexTearaway label

12.7 oz./L yd (CA), 60/40 CVC ring-spun cotton/polyesterMade with sustainably-sourced USA-grown cottonPre-shrunkMoisture-management propertiesWrinkle releaseHigh stitch density2-ply jersey-lined hood with grommetsMatching tipped and knotted drawcordTwo-needled coverstitched neck, armholes, and waistbandPouch pocket1x1 ribbed cuffs and waistbandTear away label

10 oz.(CA), 52/48 airlume combed and ringspun cotton/polyester, 32 singlesAthletic Heather is 90/10 airlume combed and ringspun cotton/polyesterHeather Navy is 60/40 airlume combed and ringspun cotton/polyesterDigitals are 100% polyester, 32 singlesMarbles are 85/15 airlume combed and ringspun cotton/polyester, 32 singlesDTG colors are 70/30 airlume combed and ringspun cotton/polyesterUnisex sizingWhite drawcordFront pouch pocketRibbed cuffs and waistbandSide seams, retail fit.Tear-away labelDTG colors - “Direct to Garment” made for printing, the outside has a 100% cotton face, to make this process feasible, while the inside of the garment still has that soft cushy feel of the cotton/poly blend .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 70%; height: 70%; }

52/48 ringspun cotton/polyester blend 3-end fleece Standard fit Raglan sleeves Blind stitch + coverstitch sewing Twill neck tape Woven label  Please note: The Wave Wash process gives each garment unique worn in look and feel, no 2 garments are exactly the same. When making Wave Wash garments we cut and sew garments then give them a heavy garment wash that gives that ultra soft, worn in, Wave Wash feel. Each garment will have different levels of wash effects, please allow for slight color variation in production.   Wave Wash fabric has a Cotton/Polyester Blend face yarn. Please do your own testing prior to screen printing. This is not a discharge friendly fabric.   When printing on our Camo Colorways it is important that the garment DOES NOT reach 320 Degrees when flashing or drying.   Wave Wash Camo Colorways are a Water Based Print on a Cotton/Polyester Blend fabric surface. At 320 degrees you risk ink migration to your print. To be really safe some printers use a Poly Blocker base, and low temperature curing inks to stay away from 320 degrees.

9 oz. (US) 15 oz (CA), 80/20 cotton/polyester blend with 100% cotton face, 30 singles Standard fit Jersey lined hood with sewn eyelets Split stitch double needle sewing on all seams Twill neck tape 1 x 1 ribbing at cuffs and waistband Dyed-to-match drawcords Pouch pocket Woven label Please note: Due to the nature of pigment dye, loose pigments may remain on the surface of the garments. We therefore strongly recommend washing these garments only with like-colored garments, as some of the pigment dyes may stain light or white colored garments in the wash cycle.Washing the garments in cold water will reduce the possibility of staining. Care Instructions: The pigment-dyeing process gives each garment unique character. Please allow for slight colour variation in production and washing. *PFD Note: Our PRM4500 & PR33500 Prepare For Dye sweatshirts are not 100% Cotton. They are a 3-End Knit with 100% cotton Face Yarn, 100% Polyester Middle Yarn, and 80% Cotton/20% Poly back yarn. We chose this blend to achieve some stretch, and an ultra-soft feel for our pigment dye that isn’t found in 100% Cotton. Please do your own testing prior to bulk production. Pigment Dyes, Tie Dyes and other unique dyes/washes work best on this garment. The sewing thread on this PFD Garment is a polyester core cotton sheath thread. We use this to achieve the strength of polyester thread with the dye capabilities of Cotton thread.

9 oz. (US) 15 oz (CA), 50/50 cotton/polyester Made with up to 5% recycled polyester from plastic bottles Durable coverstitching throughout 2-ply hood Dyed-to-match drawcord Front pouch pocket “C” logo on left sleeve Champion® products purchased must be sold only with embellishment. Sale of unembellished or blank Champion product on the internet or elsewhere is strictly prohibited. The sale or shipment of Champion products outside North America is also strictly prohibited. Champion reserves the right to discontinue sales to anyone found to be acting in violation of this policy. The decoration of any Champion® garment with the proprietary marks, names, or logos of any collegiate sports teams or collegiate institution is expressly prohibited. Copyright 2018 Hanesbrands Inc. All rights reserved.

13.5 oz.(US) 22.5 oz. (CA), 70/30 ring spun cotton/polyester fleece,100% cotton face yarns on solid colors, 20 singles Double fleece lined hood Antique silver eyelets Heavy duty 100% cotton shoestring drawcord with antique silver tips Double ribbing side panels for stretch Reverse coverstitch sewing on all seams for durability and a premium finish Body and hood panels sewn Cross-Grain to limit shrinkage & shortening after wash 520gm 100% cotton 1x1 ribbing at cuff and waistband Tearaway woven label Please note: The heather colors are not made of 100% cotton face yarn. Please do your own testing prior to screen printing.